冯铭瑄,恽自求,黑豚养殖
错误：configure: error: libevent >= 1.4.11 could not be found
解决：yum -y install libevent libevent-devel
错误：configure: error: please reinstall the mysql distributio
解决：yum -y install mysql-devel
错误：make: *** [sapi/fpm/php-fpm] error 1
解决：用make zend_extra_libs='-liconv'编译
错误：configure: error: xml configuration could not be found
解决：yum -y install libxml2 libxml2-devel
错误：configure: error: no curses/termcap library found
解决：yum -y install ncurses ncurses-devel
错误：configure: error: xml2-config not found
解决：yum -y install libxml2 libxml2-devel
错误：configure: error: cannot find openssl's <evp.h>
解决：yum install openssl openssl-devel
错误：configure: error: please reinstall the libcurl distribution -easy.h should be in <curl-dir>/include/curl/
解决：yum install curl curl-devel
错误：configure: error: cannot find ldap.h
解决：yum install openldap openldap-devel
错误：configure: error: libjpeg.(a|so) not found
解决：yum install libjpeglibjpeg -devel
错误：configure: error: libpng.(a|so) not found.
解决：yum install libpnglibpng –devel
错误：onfigure: error: freetype.h not found.
解决：yum install freetype-devel
错误：configure: error: cannot find output from lex; giving up
解决：yum -y install flex
错误：configure: error: mod_deflate has been requested but can not be built due to prerequisite failures
解决：yum -y install zlib-devel openssl-devel
错误：configure: error: unable to locate gmp.h
解决：yum install gmp-devel
错误：configure: error: cannot find mysql header files under /usr.
note that the mysql client library is not bundled anymore!
解决：yum install mysql-devel
更多的补充内容：
安装php: ./configure
configure: error: xml configuration could not be found
yum -y install libxml2 libxml2-devel
cannot find openssl's <evp.h>
yum install openssl openssl-devel
1) configure: error: xml2-config not found. please check your libxml2 installation.
#yum install libxml2 libxml2-devel (for redhat & fedora)
# aptitude install libxml2-dev (for ubuntu)
2) checking for pkg-config… /usr/bin/pkg-config
configure: error: cannot find openssl's <evp.h>
#yum install openssl openssl-devel
3) configure: error: please reinstall the bzip2 distribution
# yum install bzip2 bzip2-devel
4) configure: error: please reinstall the libcurl distribution -
easy.h should be in <curl-dir>/include/curl/
# yum install curl curl-devel (for redhat & fedora)
# install libcurl4-gnutls-dev (for ubuntu)
5) configure: error: libjpeg.(also) not found.
# yum install libjpeg libjpeg-devel
6) configure: error: libpng.(also) not found.
# yum install libpng libpng-devel
7) configure: error: freetype.h not found.
#yum install freetype-devel
8) configure: error: unable to locate gmp.h
# yum install gmp-devel
9) configure: error: cannot find mysql header files under /usr.
note that the mysql client library is not bundled anymore!
# yum install mysql-devel (for redhat & fedora)
# apt-get install libmysql++-dev (for ubuntu)
10) configure: error: please reinstall the ncurses distribution
# yum install ncurses ncurses-devel
11) checking for unixodbc support… configure: error: odbc header file ‘/usr/include/sqlext.h' not found!
# yum install unixodbc-devel
12) configure: error: cannot find pspell
# yum install pspell-devel
13) configure: error: mcrypt.h not found. please reinstall libmcrypt.
# yum install libmcrypt libmcrypt-devel (for redhat & fedora)
# apt-get install libmcrypt-dev
14) configure: error: snmp.h not found. check your snmp installation.
# yum install net-snmp net-snmp-devel
15)
/usr/bin/ld: cannot find -lltdl
collect2: ld returned 1 exit status
make: *** [sapi/cgi/php-cgi] error 1
# yum install libtool-ltdl.x86_64 libtool-ltdl-devel.x86_64
16）
为php编译xcache模块的时候，需要运行phpize
得到了一个错误
#/usr/local/php/bin/phpize
configuring for:
php api version: 20041225
zend module api no: 20060613
zend extension api no: 220060519
cannot find autoconf. please check your autoconf installation and the $php_autoconf
environment variable is set correctly and then rerun this script.
通过安装 autoconf 可以解决
centos下执行 yum install autoconf 即可
ubuntu下执行 apt-get install autoconf 即可
17）
# /usr/local/php/bin/phpize
cannot find config.m4.
make sure that you run '/usr/local/php/bin/phpize' in the top level source directory of the module
修改方法：
[root@centos lnmp]# cd php-5.2.14ext/
[root@centos ext]# ./ext_skel --extname=my_module
creating directory my_module
creating basic files: config.m4 config.w32 .cvsignore my_module.c php_my_module.h credits experimental tests/001.phpt my_module.php [done].
to use your new extension, you will have to execute the following steps:
1. $ cd ..
2. $ vi ext/my_module/config.m4
3. $ ./buildconf
4. $ ./configure --[with|enable]-my_module
5. $ make
6. $ ./php -f ext/my_module/my_module.php
7. $ vi ext/my_module/my_module.c
8. $ make
repeat steps 3-6 until you are satisfied with ext/my_module/config.m4 and
step 6 confirms that your module is compiled into php. then, start writing
code and repeat the last two steps as often as necessary.
[root@centos ext]# cd my_module/
[root@centos my_module]# vim config.m4
根据你自己的选择将
dnl php_arg_with(my_module, for my_module support,
dnl make sure that the comment is aligned:
dnl [ --with-my_module include my_module support])
修改成
php_arg_with(my_module, for my_module support,
make sure that the comment is aligned:
[ --with-my_module include my_module support])
或者将
dnl php_arg_enable(my_module, whether to enable my_module support,
dnl make sure that the comment is aligned:
dnl [ --enable-my_module enable my_module support])
修改成
php_arg_enable(my_module, whether to enable my_module support,
make sure that the comment is aligned:
[ --enable-my_module enable my_module support])
[root@centos my_module]# vim my_module.c
将文件其中的下列代码进行修改
/* every user visible function must have an entry in my_module_functions[].
*/
function_entry my_module_functions[] = {
php_fe(say_hello, null) /* ?添加着一行代码 */
php_fe(confirm_my_module_compiled, null) /* for testing, remove later. */
{null, null, null} /* must be the last line in my_module_functions[] */
};
在文件的最后添加下列代码
php_function(say_hello)
{
zend_printf("hello sdomain!");
}
再修改：php_sdomain.h
vi php_sdomain.h
在php_function(confirm_my_module_compiled ); /* for testing, remove later. */ 这行的下面添加一行：
php_function(say_hello); /* for testing, remove later. */
保存文件退出
然后我们就可以在这个目录下使用上面的命令了
/usr/local/php/bin/phpize
执行以后会看到下面的
[root@ns sdomain]# /usr/local/php/bin/phpize
configuring for:
php api version: 20020918
zend module api no: 20020429
zend extension api no: 20050606
[root@ns sdomain]#
然后执行./configure --with-php-config=/usr/local/php/bin/php-config
然后执行make
make install
然后他会把对应的so文件生成放到php安装目录下面的一个文件夹，并提示在在什么地方，然后再把里面的so文件拷到你存放so文件的地方
即你在php.ini里面的extension_dir所指定的位置
最后一步是你在php.ini文件中打开这个扩展
extension=sdomain.so
然后
重新起动apache
以上错误都是在整个编译安装遇到的问题，然后结合网上的资料，找到的解决方法，总结到这个地方，希望能帮到大家！
如对本文有疑问，请在下面进行留言讨论，广大热心网友会与你互动！！
点击进行留言回复
我要评论
网友评论