apache 局域网访问配置方案第1/2页_Linux

#

# this is the main apache http server configuration file.  it contains the

# configuration directives that give the server its instructions.

# see <url:http://httpd.apache.org/docs/2.2/> for detailed information.

# in particular, see

# <url:http://httpd.apache.org/docs/2.2/mod/directives.html>

# for a discussion of each configuration directive.

#

# do not simply read the instructions in here without understanding

# what they do.  they're here only as hints or reminders.  if you are unsure

# consult the online docs. you have been warned.

#

# configuration and logfile names: if the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for win32), the

# server will use that explicit path.  if the filenames do *not* begin

# with "/", the value of serverroot is prepended -- so "logs/foo.log"

# with serverroot set to "g:/appserv/apache2.2" will be interpreted by the

# server as "g:/appserv/apache2.2/logs/foo.log".

#

# note: where filenames are specified, you must use forward slashes

# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").

# if a drive letter is omitted, the drive on which apache.exe is located

# will be used by default.  it is recommended that you always supply

# an explicit drive letter in absolute paths, however, to avoid

# confusion.

#

# prefork mpm

# startservers: number of server processes to start

# minspareservers: minimum number of server processes which are kept spare

# maxspareservers: maximum number of server processes which are kept spare

# maxclients: maximum number of server processes allowed to start

# maxrequestsperchild: maximum number of requests a server process serves

<ifmodule mpm_prefork_module>

    startservers          5

    minspareservers       5

    maxspareservers      10

    maxclients          150

    maxrequestsperchild   0

</ifmodule>

# threadsperchild: constant number of worker threads in the server process

# maxrequestsperchild: maximum  number of requests a server process serves

#threadsperchild 250

maxrequestsperchild  0

#

# serverroot: the top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# do not add a slash at the end of the directory path.  if you point

# serverroot at a non-local disk, be sure to point the lockfile directive

# at a local disk.  if you wish to share the same serverroot for multiple

# httpd daemons, you will need to change at least lockfile and pidfile.

#

serverroot "g:/appserv/apache2.2"

#

# listen: allows you to bind apache to specific ip addresses and/or

# ports, instead of the default. see also the <virtualhost>

# directive.

#

# change this to listen on specific ip addresses as shown below to

# prevent apache from glomming onto all bound ip addresses (0.0.0.0)

#

#listen 192.168.1.4:80

listen 80

#

# this configuration file reflects default settings for apache http server.

#

# you may change these, but chances are that you may not need to.

#

#

# timeout: the number of seconds before receives and sends time out.

#

timeout 300

#

# keepalive: whether or not to allow persistent connections (more than

# one request per connection). set to "off" to deactivate.

#

keepalive on

#

# maxkeepaliverequests: the maximum number of requests to allow

# during a persistent connection. set to 0 to allow an unlimited amount.

# we recommend you leave this number high, for maximum performance.

#

maxkeepaliverequests 100

#

# keepalivetimeout: number of seconds to wait for the next request from the

# same client on the same connection.

#

keepalivetimeout 5

#

# usecanonicalname: determines how apache constructs self-referencing

# urls and the server_name and server_port variables.

# when set "off", apache will use the hostname and port supplied

# by the client.  when set "on", apache will use the value of the

# servername directive.

#

usecanonicalname off

#

# accessfilename: the name of the file to look for in each directory

# for additional configuration directives.  see also the allowoverride

# directive.

#

accessfilename .htaccess

#

# servertokens

# this directive configures what you return as the server http response

# header. the default is 'full' which sends information about the os-type

# and compiled in modules.

# set to one of:  full | os | minor | minimal | major | prod

# where full conveys the most information, and prod the least.

#

servertokens full

#

# optionally add a line containing the server version and virtual host

# name to server-generated pages (internal error documents, ftp directory

# listings, mod_status and mod_info output etc., but not cgi generated

# documents or custom error documents).

# set to "email" to also include a mailto: link to the serveradmin.

# set to one of:  on | off | email

#

serversignature on

#

# hostnamelookups: log the names of clients or just their ip addresses

# e.g., www.apache.org (on) or 204.62.129.132 (off).

# the default is off because it'd be overall better for the net if people

# had to knowingly turn this feature on, since enabling it means that

# each client request will result in at least one lookup request to the

# nameserver.

#

hostnamelookups off

#

# dynamic shared object (dso) support

#

# to be able to use the functionality of a module which was built as a dso you

# have to place corresponding `loadmodule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# statically compiled modules (those listed by `httpd -l') do not need

# to be loaded here.

#

# example:

# loadmodule foo_module modules/mod_foo.so

#

loadmodule actions_module modules/mod_actions.so

loadmodule alias_module modules/mod_alias.so

loadmodule asis_module modules/mod_asis.so

loadmodule auth_basic_module modules/mod_auth_basic.so

#loadmodule auth_digest_module modules/mod_auth_digest.so

#loadmodule authn_anon_module modules/mod_authn_anon.so

#loadmodule authn_dbm_module modules/mod_authn_dbm.so

loadmodule authn_default_module modules/mod_authn_default.so

loadmodule authn_file_module modules/mod_authn_file.so

#loadmodule authz_dbm_module modules/mod_authz_dbm.so

loadmodule authz_default_module modules/mod_authz_default.so

loadmodule authz_groupfile_module modules/mod_authz_groupfile.so

loadmodule authz_host_module modules/mod_authz_host.so

loadmodule authz_user_module modules/mod_authz_user.so

loadmodule autoindex_module modules/mod_autoindex.so

#loadmodule cern_meta_module modules/mod_cern_meta.so

loadmodule cgi_module modules/mod_cgi.so

#loadmodule dav_module modules/mod_dav.so

#loadmodule dav_fs_module modules/mod_dav_fs.so

#loadmodule deflate_module modules/mod_deflate.so

loadmodule dir_module modules/mod_dir.so

loadmodule env_module modules/mod_env.so

#loadmodule expires_module modules/mod_expires.so

#loadmodule file_cache_module modules/mod_file_cache.so

#loadmodule headers_module modules/mod_headers.so

loadmodule imagemap_module modules/mod_imagemap.so

loadmodule include_module modules/mod_include.so

#loadmodule info_module modules/mod_info.so

loadmodule isapi_module modules/mod_isapi.so

loadmodule log_config_module modules/mod_log_config.so

loadmodule mime_module modules/mod_mime.so

#loadmodule mime_magic_module modules/mod_mime_magic.so

#loadmodule proxy_module modules/mod_proxy.so

#loadmodule proxy_ajp_module modules/mod_proxy_ajp.so

#loadmodule proxy_balancer_module modules/mod_proxy_balancer.so

#loadmodule proxy_connect_module modules/mod_proxy_connect.so

#loadmodule proxy_http_module modules/mod_proxy_http.so

#loadmodule proxy_ftp_module modules/mod_proxy_ftp.so

loadmodule negotiation_module modules/mod_negotiation.so

#loadmodule rewrite_module modules/mod_rewrite.so

loadmodule setenvif_module modules/mod_setenvif.so

#loadmodule speling_module modules/mod_speling.so

#loadmodule status_module modules/mod_status.so

#loadmodule unique_id_module modules/mod_unique_id.so

loadmodule userdir_module modules/mod_userdir.so

#loadmodule usertrack_module modules/mod_usertrack.so

#loadmodule vhost_alias_module modules/mod_vhost_alias.so

#loadmodule ssl_module modules/mod_ssl.so

loadmodule php5_module g:/appserv\php5\php5apache2_2.dll

# 'main' server configuration

#

# the directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <virtualhost> definition.  these values also provide defaults for

# any <virtualhost> containers you may define later in the file.

#

# all of these directives may appear inside <virtualhost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#

#

# serveradmin: your address, where problems with the server should be

# e-mailed.  this address appears on some server-generated pages, such

# as error documents.  e.g. admin@your-domain.com

#

serveradmin admin@jswkj.com

#

# servername gives the name and port that the server uses to identify itself.

# this can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

#

# if your host doesn't have a registered dns name, enter its ip address here.

#

servername 192.168.1.4

#bindaddress 192.168.1.4

#

# documentroot: the directory out of which you will serve your

# documents. by default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

documentroot "g:/appserv/www"

#

# each directory to which apache has access can be configured with respect

# to which services and features are allowed and/or disabled in that

# directory (and its subdirectories).

#

# first, we configure the "default" to be a very restrictive set of

# features.

#

<directory />

    options followsymlinks execcgi indexes

    allowoverride none

    order deny,allow

    deny from all

    satisfy all

</directory>

#

# note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#

#

# this should be changed to whatever you set documentroot to.

#

<directory "g:/appserv/www">

    #

    # possible values for the options directive are "none", "all",

    # or any combination of:

    #   indexes includes followsymlinks symlinksifownermatch execcgi multiviews

    #

    # note that "multiviews" must be named *explicitly* --- "options all"

    # doesn't give it to you.

    #

    # the options directive is both complicated and important.  please see

    # http://httpd.apache.org/docs/2.2/mod/core.html#options

    # for more information.

    #

    options indexes followsymlinks multiviews execcgi

    #

    # allowoverride controls what directives may be placed in .htaccess files.

    # it can be "all", "none", or any combination of the keywords:

    #   options fileinfo authconfig limit

    #

    allowoverride all

    #

    # controls who can get stuff from this server.

    #

    order allow,deny

    allow from all



</directory>

#

# directoryindex: sets the file that apache will serve if a directory

# is requested.

#

<ifmodule dir_module>

    directoryindex index.php  index.htm

</ifmodule>

#

# the following lines prevent .htaccess and .htpasswd files from being

# viewed by web clients.

#

<filesmatch "^\.ht">

    order allow,deny

    deny from all

</filesmatch>

#

# errorlog: the location of the error log file.

# if you do not specify an errorlog directive within a <virtualhost>

# container, error messages relating to that virtual host will be

# logged here.  if you *do* define an error logfile for a <virtualhost>

# container, that host's errors will be logged there and not here.

#

errorlog logs/error.log

#

# loglevel: control the number of messages logged to the error_log.

# possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

loglevel warn



<ifmodule log_config_module>

    #

    # the following directives define some format nicknames for use with

    # a customlog directive (see below).

    #

    logformat "%h %l %u %t \"%r\" %>s %b \"%{referer}i\" \"%{user-agent}i\"" combined

    logformat "%h %l %u %t \"%r\" %>s %b" common



    <ifmodule logio_module>

      # you need to enable mod_logio.c to use %i and %o

      logformat "%h %l %u %t \"%r\" %>s %b \"%{referer}i\" \"%{user-agent}i\" %i %o" combinedio

    </ifmodule>

    #

    # the location and format of the access logfile (common logfile format).

    # if you do not define any access logfiles within a <virtualhost>

    # container, they will be logged here.  contrariwise, if you *do*

    # define per-<virtualhost> access logfiles, transactions will be

    # logged therein and *not* in this file.

    #

    customlog logs/access.log common

12 下一页